Brugerhåndbog Siemens Vejrradio S7-300F-2 Pn [8/65 Sider]

Siemens vejrradio S7-300F-2 PN

Industry Automation and Drive Technologies - SCE

TIA Training Document

Page 8 of 65

Module E11

Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and

RF180C

3 NOTES REGARDING THE SIMATIC RFID COMPONENTS

The communication module RF180C is a module for operating RFID components at any controller by

means of PROFINET IO.

At the RF180C, up to 2 readers (SLG = write/read device) can be operated in parallel. The user can

start a command in parallel on two readers (FB 45 if operated on a SIMATIC S7)

The tag data is accessed by means of addressing the tag physically.

In the SIMATIC S7, FB 45 is provided for this. FB 45 makes available to the S7user an interface that

is easy to handle and is equipped with powerful commands (processing a complete tag with a single

command; command chaining; S7 data structures by means of UDTs).

The RF180C is integrated into the hardware configuration by means of a GSDML file.

Then, the RF180C can be configured by means of HWConfig of the SIMATIC Manager.

The GSDML file is provided on the CD "RFID Systems“.

Additional information is available in the operating instructions

"RFID Systems Communication Module RF180C“.

Controller

For example, S7400

CPU

PROFINET IO cable

24V for RF180C and reader (SLG =

write/read device)

to additional

PROFINET IO stations